dotfiles/nixos/configuration.nix

248 lines
6.9 KiB
Nix
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Edit this configuration file to define what should be installed on
# your system. Help is available in the configuration.nix(5) man page, on
# https://search.nixos.org/options and in the NixOS manual (`nixos-help`).
{ config, lib, pkgs, ... }:
let berkeley-mono = pkgs.stdenv.mkDerivation {
name = "berkeley-mono";
version = "1.007";
src = /home/user/Dropbox/berkeley-fonts;
installPhase = ''
mkdir -p $out/share/fonts/truetype/berkeley-mono
cp -r $src/* $out/share/fonts/truetype/berkeley-mono
'';
};
in {
imports =
[ # Include the results of the hardware scan.
./hardware-configuration.nix
];
# Use the systemd-boot EFI boot loader.
boot.loader.systemd-boot.enable = true;
boot.loader.efi.canTouchEfiVariables = true;
networking.hostName = "zbook"; # Define your hostname.
# Pick only one of the below networking options.
# networking.wireless.enable = true; # Enables wireless support via wpa_supplicant.
networking.networkmanager.enable = true; # Easiest to use and most distros use this by default.
# Set your time zone.
time.timeZone = "Asia/Shanghai";
# Configure network proxy if necessary
networking.nameservers = [
"8.8.8.8"
"1.1.1.1"
];
# networking.proxy.default = "http://127.0.0.1:7897/";
# networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
# Select internationalisation properties.
# i18n.defaultLocale = "en_US.UTF-8";
# console = {
# font = "Lat2-Terminus16";
# keyMap = "us";
# useXkbConfig = true; # use xkb.options in tty.
# };
fonts = {
packages = with pkgs; [
noto-fonts
noto-fonts-emoji
source-han-sans
source-han-serif
(nerdfonts.override {
fonts = [
"JetBrainsMono"
];
})
berkeley-mono
];
};
i18n.inputMethod = {
enabled = "fcitx5";
fcitx5.addons = with pkgs; [
fcitx5-mozc
fcitx5-gtk
fcitx5-chinese-addons
fcitx5-rime
];
};
# Enable the X11 windowing system.
services.xserver = {
enable = true;
dpi = 160;
windowManager.awesome = {
enable = true;
luaModules = with pkgs.luaPackages; [
luarocks
luadbi-mysql
];
};
};
services.logind.extraConfig = "IdleAction=ignore";
services.displayManager = {
sddm.enable = true;
defaultSession = "none+awesome";
};
# services.networking.wireless.userControlled = true;
services.blueman.enable = true;
# Configure keymap in X11
services.xserver.xkb.layout = "us";
services.xserver.xkb.options = "eurosign:e,caps:escape";
# Enable CUPS to print documents.
# services.printing.enable = true;
hardware.enableAllFirmware = true;
services.xserver.videoDrivers = ["nvidia"];
hardware.opengl.enable = true;
hardware.nvidia = {
modesetting.enable = true;
powerManagement.finegrained = false;
open = false; # Do not use open-source kernel module
nvidiaSettings = true;
prime = {
offload = {
enable = true;
enableOffloadCmd = true;
};
amdgpuBusId = "PCI:101:0:0";
nvidiaBusId = "PCI:1:0:0";
};
package = config.boot.kernelPackages.nvidiaPackages.mkDriver {
version = "535.154.05";
sha256_64bit = "sha256-fpUGXKprgt6SYRDxSCemGXLrEsIA6GOinp+0eGbqqJg=";
sha256_aarch64 = "sha256-G0/GiObf/BZMkzzET8HQjdIcvCSqB1uhsinro2HLK9k=";
openSha256 = "sha256-wvRdHguGLxS0mR06P5Qi++pDJBCF8pJ8hr4T8O6TJIo=";
settingsSha256 = "sha256-9wqoDEWY4I7weWW05F4igj1Gj9wjHsREFMztfEmqm10=";
persistencedSha256 = "sha256-d0Q3Lk80JqkS1B54Mahu2yY/WocOqFFbZVBh+ToGhaE=";
};
};
# Enable sound.
hardware.pulseaudio = {
enable = true;
package = pkgs.pulseaudioFull;
extraConfig = ''
load-module module-switch-on-connect
'';
};
hardware.bluetooth = {
enable = true;
settings = {
General = {
Enable = "Source,Sink,Media,Socket";
Experimental = true;
};
};
};
hardware.bluetooth.powerOnBoot = true;
# OR
# services.pipewire = {
# enable = true;
# pulse.enable = true;
# };
# Enable touchpad support (enabled default in most desktopManager).
services.libinput.enable = true;
nixpkgs.config.allowUnfree = true;
# Define a user account. Don't forget to set a password with passwd.
users.users.user = {
isNormalUser = true;
extraGroups = [ "wheel" "wireshark" ]; # Enable sudo for the user.
packages = with pkgs; [
# home-manager
contour
vivaldi
# firefox
# tree
];
};
# List packages installed in system profile. To search, run:
# $ nix search wget
environment.systemPackages = with pkgs; [
neovim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
wget
sqlite
# clash-verge-rev
bind
pciutils
iptables
];
# Some programs need SUID wrappers, can be configured further or are
# started in user sessions.
programs.mtr.enable = true;
programs.gnupg.agent = {
enable = true;
enableSSHSupport = true;
};
# Clash
programs.clash-verge = {
enable = true;
autoStart = true;
tunMode = true;
};
# Wireshark
programs.wireshark.enable = true;
programs.dconf.enable = true;
# List services that you want to enable:
# Enable the OpenSSH daemon.
services.openssh.enable = true;
services.openvpn.servers = {
htb = { config = '' config /home/user/Downloads/starting_point_bzw.ovpn ''; };
};
# Open ports in the firewall.
# networking.firewall.allowedTCPPorts = [ ... ];
# networking.firewall.allowedUDPPorts = [ ... ];
# Or disable the firewall altogether.
networking.firewall.enable = false;
# Copy the NixOS configuration file and link it from the resulting system
# (/run/current-system/configuration.nix). This is useful in case you
# accidentally delete configuration.nix.
system.copySystemConfiguration = true;
# This option defines the first version of NixOS you have installed on this particular machine,
# and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
#
# Most users should NEVER change this value after the initial install, for any reason,
# even if you've upgraded your system to a new NixOS release.
#
# This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
# so changing it will NOT upgrade your system - see https://nixos.org/manual/nixos/stable/#sec-upgrading for how
# to actually do that.
#
# This value being lower than the current NixOS release does NOT mean your system is
# out of date, out of support, or vulnerable.
#
# Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
# and migrated your data accordingly.
#
# For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
system.stateVersion = "24.05"; # Did you read the comment?
}